Refinishing a floor is a big deal, and if the floor has only one or two worn areas, while the rest of the finish is in good condition, it’s more economical to make spot repairs. Done correctly, a spot repair is all but unnoticeable, provided you’ve correctly matched the finish and — if necessary — the stain.

Can you refinish just part of hardwood floor?

We are happy to replace sections of flooring but highly recommend refinishing the entire area for a consistent look. For small issues that result in gouges or scratches in the wood, it is often possible to use wood putty to fix hardwood flooring.

Can you replace small sections of hardwood floor?

If your hardwood floor is in generally fine shape, with only a damaged spot or two, it is easy and economical to make small repairs by replacing a strip or plank of flooring. … This design makes replacing a single strip or plank challenging, but not impossible.

Can you spot refinish a floor?

Hardwood floors add a warm and natural glow to any room. … It’s not necessary to strip and re-stain the entire floor when this happens. With a little bit of work and some attention to detail, you can refinish that spot so well that you’ll forget it was ever there.

Can you Restain hardwood floors without sanding?

Whether you have traditional hardwoods, prefinished wood, or laminated wood, restoring without sanding is a practical solution. Though you can sand your traditional hardwoods, it’s difficult or even impossible to sand prefinished or laminated wood floors.

How much does it cost to refinish hardwood floors?

Nationally, the average cost for refinishing a hardwood floor is $1,761, within a typical range of $1,074 to $2,486. But there’s every chance your floor is anything but average, and your actual costs can vary depending on many factors, especially the availability and cost of labor in your area.

How do you get stains out of hardwood floors without sanding?

Soak a cotton rag with hydrogen peroxide. Place the wet rag on the stain and allow it to soak in the wood to bleach out the stain. Remove the rag, and wipe up any excess hydrogen peroxide. Allow the floor to dry.

Can you spot sand wood floors?

Wear Spots Use a fine-grained sandpaper for this job and make sure when you’re done that the floor is as smooth as glass. While you’re still in sanding mode, find a different, less-visible area of the floor—like in a closet or under the bed—and sand away a very small patch of finish and stain.

How do you fix white spots on hardwood floors?

1. Mineral Oil. Apply a thin layer of mineral oil using a soft microfibre cloth. Wait several minutes and repeat the process. …
2. Mineral Spirits. Mineral spirits penetrate deeper into the wood floor finish. …
3. Baking Soda & Water Paste. Make a paste of baking soda and water.

Is it cheaper to refinish hardwood floors or replace with laminate?

The truth is, it is almost always cheaper to refinish your floor than to replace it. When replacing, you must consider the cost of the new wood as well as the installation, plus the cost to haul your old wood floors away.

Article first time published on

Is it hard to refinish hardwood floors?

The hardwood floor refinishing process is easier and less expensive than sanding down to bare wood and takes less time. In a few hours, your floors will look as good as new. The job requires using a buffer, which you can rent at a home center, and a vacuum to suck up dust.

How can I change the color of my hardwood floors without sanding?

The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish.

Can I change the color of my hardwood floor?

When you refinish your floors, you can change the color of your flooring. Most hardwood floors can be made darker, lighter, redder, or anywhere in between. If your flooring is solid hardwood, it can be sanded and refinished in a different stain for a different appearance.

How much does it cost to have hardwood floors sanded and stained?

If your hardwood floors are dull, scratched, and looking old, it’s probably time to refinish them. According to HomeAdvisor, the typical price range to refinish hardwood floors is between $1,074 and $2,485, with the national average at $1,757. This comes out to $3 to $8 per square foot, including materials and labor.

How do you get black spots out of hardwood floors?

Just mix a cup of warm water with a cup of white vinegar to get rid of the dark spots. Scrub the stained area using a rug until the dark spot is gone, then pat the place dry. Hydrogen Peroxide – Like white vinegar, hydrogen peroxide can also eliminate both stain and odor from hardwood.

Does hydrogen peroxide remove stains on hardwood floors?

Hydrogen peroxide works to clean and sanitize wood. When used on wood floors, it removes surface dirt as well as stubborn stains. Whether your hardwood floors have pet stains, dirt, mud or just about anything else, hydrogen peroxide can restore their appearance. … Bleaching is another effect of hydrogen peroxide on wood.

What causes white spots on hardwood floors?

Water spills and heat are usually the main causes of these white spots. Hot items such as pizza boxes, irons, or hot pans placed on the wood floors can cause white patches. Many wood floors are coated with polyurethane to make them resistant to staining and damage.

Can you use old English on hardwood floors?

Well yes! I totally recommend the Old English Scratch Cover to hide those unsightly scratches and nicks on your wood floor. This popular wood surface scratch cover works really well on all types of wood floors.

How do you make hardwood floors shine like they are wet?

1. Mix about a quarter cup (60ml) of distilled vinegar in every one gallon (3.8 L) warm water and mix well for effective action. …
2. Add a few drops of essential oil to the solution. …
3. Dampen the mop and wring properly to avoid excess solution from spilling on the floor.

Can you stay in house while floors are refinished?

The strong scent of polyurethane and stain lingers in the atmosphere for very long and can kick-start a migraine any time or all the time. Even if it’s not causing migraines, it’s still uncomfortable to live in a house where the floor is being refinished and there are strong odors in the air.

How long do you have to stay off hardwood floors after refinishing?

How long do I have to wait to use my room after my floors are refinished? We recommend waiting 6 hours before walking on your new floors in socks. After 24 hours you can walk through with shoes on. Allow 48 hours before setting furniture and returning pets.

How much does it cost to refinish 1500 square feet of hardwood?

Room sizeSquare feetAverage costWhole house1,000$2,000 – $4,000Whole house1,500$2,800 – $6,000Whole house2,000$3,400 – $8,000

What are the white spots on wood?

When a hot item comes in contact with real wood, the heat opens up the pores in the material and water enters the wood’s surface. As it cools, the pores close, trapping the moisture. The moisture alters the appearance of the wood, changing its colour and leaving behind a stain. Heat marks are white.

What causes white spots on polyurethane?

White spots on polyurethane are generally caused by two things: Not stirring thoroughly enough before applying it, or a buildup of moisture. While preventing the white spots is easier than fixing them, you can fix them by sanding down the high spots and then drawing out the moisture.

Can you put vinyl planks over hardwood floors?

LVT planks are so versatile that they can be installed over nearly every kind of flooring — including hardwood flooring. Hardwood floors have been famously coveted for many years. … No matter how well-maintained, hardwood flooring will need refinishing to restore it occasionally.

Can you put hardwood floor over old hardwood?

Yes, you can install over an existing wood floor, provided it meets some important conditions. … You’ll want to carefully inspect the existing flooring and repair, replace or re-fasten loose or damaged flooring, as any loose areas or voids will allow movement in the new floor, which causes squeaks.

How much does it cost to refinish $1000 square feet of hardwood floors?

Flooring square footageAverage cost751 – 1000 sq. ft.$2,1001001 – 1500 sq. ft.$2,3501501 – 2000 sq. ft.$3,5002001 – 3000 sq. ft.$5,000

Can you stain hardwood floors GREY?

Yes, believe it or not, gray hardwood flooring is in style! … As background, it’s easy to get the gray color in pre-finished maple or birch floors. Because these woods are closed pored, they absorb the stains differently and some of the darker brown stains turn gray on maple and birch (see picture to the right).

Can I sand hardwood floors with a hand sander?

The process for sanding a floor by hand would be, as a general rule, to start on a 40 grit sandpaper and work your way up to 100 or 120 grit paper to leave a fine finish. It is important to keep any sander moving so it does not dig into or burn the floor. … Get yourself a floor sander, or better still hire a pro.