ItemUnit CostCostExposed aggregate finish: medium grade washed colored stones less than 3/8″ diameter.$2.49$1,309Upgrade: additional cost to apply decorative acrylic sealant; wet look, non-yellowing, solvent based.$0.28$144Material Cost$2.91$1,453+ Labor Cost (base)$36$1,152

How much more is exposed aggregate concrete?

ItemUnit CostCostExposed aggregate finish: medium grade washed colored stones less than 3/8″ diameter.$2.49$1,309Upgrade: additional cost to apply decorative acrylic sealant; wet look, non-yellowing, solvent based.$0.28$144Material Cost$2.91$1,453+ Labor Cost (base)$36$1,152

Is Exposed aggregate better than concrete?

Compared to brushed concrete, exposed aggregate is more slip-resistant. … Exposed aggregate does not require you to perform heavy maintenance tasks because it is durable. It is a great option if you would like to use decorative techniques on your driveway and other areas that receive high traffic.

Is plain concrete cheaper than exposed aggregate?

Comparing the two, aggregate is more affordable as it is usually at the lower end of the pricing range. Stamping is not expensive, but using aggregate concrete is more economical, especially if you have a larger project. Typically, stamped concrete starts at $120 while an exposed aggregate finish is around $100.

Is Exposed aggregate cheaper than stamped concrete?

Regular concrete will provide a lower cost to install, as it will be your traditional grey slab. Adding the element of design through use of exposed aggregate will add a bit to the overall cost, and may save a little bit of money in comparison to a stamped surface.

Is aggregate concrete more expensive than pavers?

Concrete can be up to 15% cheaper per metre than paving depending on the decorative concrete solution you have chosen. Aggregate concrete is extremely customisable and can produce a colour standard feature based on the stones you have chosen.

Why is exposed aggregate so expensive?

Exposed aggregate concrete costs as much as double what you’d pay for normal class concrete. This is because there is an additional material cost for the aggregate used and more labour involved in creating the finish.

Is Coloured concrete more expensive than exposed aggregate?

Exposed aggregate driveway cost vs decorative concrete They require less attention which saves you effort, time, and money. Exposed aggregate concrete is cheaper than its decorative counterpart. While the latter is not quite pricy, using concrete would be cost-efficient for larger spaces.

Is Exposed aggregate concrete worth it?

ADVANTAGES OF EXPOSED AGGREGATE FINISHES The surface is rugged, nonskid, and resistant to heavy traffic and weather extremes. … Exposed aggregate is highly versatile and contrasts beautifully with plain concrete or other decorative treatments such as stamping, stenciling, staining, and integral coloring.

How much does exposed aggregate driveway cost?

The exposed aggregate driveway costs approximately $100 to $150 per square metre. This type of concrete is applied after the concrete slab is poured, or over an old concrete after deep cleaning and reparation.

Article first time published on

Is Exposed aggregate good for patio?

Exposed aggregate concrete is a popular material for patios, your alfresco outdoor entertainment areas, pool surrounds and driveways. It’s durable, impervious to weather and strong enough to support the heaviest of vehicles. And because it can’t be mass-produced, you’ll be guaranteed a unique look when you use it.

How long does Exposed aggregate last?

But how long will exposed aggregate last? With the right care, you’re looking at over 10 to 20 years of life. One of the most attractive benefits of using exposed aggregate is its longevity. At Concept Concrete, we offer up to a 78-month warranty on your exposed concrete driveways, patios, and more.

How long does aggregate concrete last?

A well-maintained aggregate surface can last upwards of twenty-five years, so it’s well worth hiring a professional concrete service provider to protect your investment and keep it looking beautiful.

What is the cheapest surface for a driveway?

Generally, gravel is the cheapest material, with resin and concrete being the most expensive.

How much does a 20x20 patio cost?

How Much Does a 20×20 Paver Patio Cost? According to data from HomeGuide, a 20-foot by 20-foot paver patio runs from $1,900 to $6,800, including labor and materials such as clay brick, natural stone or concrete pavers. Obviously, the larger the patio, the more materials required and the greater the labor costs.

Is it cheaper to do stamped concrete or pavers?

Stamped concrete is one of the most popular patio and deck materials worldwide. It is slightly cheaper than pavers and offers a variety of colors and patterns. Since stamped concrete is in fact concrete, it will crack at some point. Installers will try to combat this issue by placing control joints every few feet.

What is the cost of exposed concrete?

– Exposed aggregate concrete pricing ranges from $13.00 – 16.00/ square foot. – Colored and stamped concrete pricing ranges from $16.00 – 19.00/ square foot.

How much does it cost to install exposed aggregate patio?

The national average materials cost to install an exposed aggregate patio is $2.04 per square foot, with a range between $1.90 to $2.18. The total price for labor and materials per square foot is $10.15, coming in between $9.11 to $11.18.

Does Exposed aggregate crack?

that fills it will be a lot more visible than the neutral epoxy. there is no concretor that will guarantee against cracking, as long as all efforts and correct installation practices are done, concrete can and does crack.

Whats cheaper paving or concreting?

Paving is cheaper compared to concrete and is a higher quality product. The cost effectiveness also applies in terms of installing. The only time the costs are almost similar is the preparation time because the space has to be excavated, levelled and filled with the bedding material which forms the base.

Which is cheaper pavers or concrete driveway?

Cost Comparison Concrete has a significantly lower cost when compared to paving stones. On average, concrete costs about $7-$10 per square foot, while paving stones have a cost of approximately $9-$14 per square foot. It’s important to consider long-term costs in addition to upfront costs for these materials.

Is it cheaper to pave or concrete a driveway?

The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. … In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.

Is concrete or aggregate concrete better?

Both solid concrete (with a standard tooled finish) and aggregate driveways are durable, long-lasting options. … Aggregate variations allow you to add color and texture to your driveway, creating an eye-appealing design that coordinates with your house and landscaping.

Is sealed exposed aggregate slippery?

Sealed surface may be slippery when wet. For additional slip resistance, use Glaze ‘N Seal Grip ‘N Seal additive. Product coverage will be 100 – 400 square feet per gallon for the first coat depending on surface porosity. Second coat will go up to 50% further.

Which concrete is best for driveway?

The best concrete mix for driveways is at least 3500 psi compressive strength and 5-6 inches thick over compacted gravel and earth with a water to cement ratio of . 50 and aggregate less than an inch.

How much does Pebblecrete cost?

The average pebblecrete cost per square metre is $100 to $150, but it will cost slightly more if it’s laid on a sloping or steeply sloping surface. For example, if you want to have a single car pebblecrete driveway laid on a flat surface, it might cost around $2000-$2500.

Is Pebblecrete the same as exposed aggregate?

Pebblecrete is concrete that incorporates small pebbles to change its appearance and texture. It’s also known as exposed aggregate.

How much does a concrete driveway cost per square Metre?

Types of concrete drivewaysAverage reported cost per square metrePlain concrete$65Coloured concrete$75 – $90Stamping concrete$100 – $150Exposed aggregate$100 – $150

What does aggregate cost mean?

Aggregate cost is a term used to describe the total amount of money a particular project or proposal will cost a company. This cost is especially important for companies to know when planning projects or deciding to launch a new product or service.

Is Coloured concrete expensive?

Coloured concrete has colour added through the depth of the concrete. If you’re pouring a new concrete driveway, this might be the best choice. It will only cost about $10 per square metre more than plain concrete. Because it is added to the concrete mix, it is the most durable type of coloured concrete.

Is Exposed aggregate concrete durable?

Unfortunately, it is difficult to put down exposed aggregate without the help of a professional. Additionally, it typically needs to be resealed every few years in order to continue looking good. An exposed aggregate driveway is typically durable, which is not surprising since it is made out of concrete.