The 8 point sockets are designed for quick engagement on 4 point fasteners. They have a high polished chrome finish. The size of the sockets range from 3/8 to 1 1/4-Inch.

Are there 8 point sockets?

The 8 point sockets are designed for quick engagement on 4 point fasteners. They have a high polished chrome finish. The size of the sockets range from 3/8 to 1 1/4-Inch.

What's the point of 12 point sockets?

The additional points make these sockets easier to connect with the heads of fasteners. This is ideal if you are trying to work on a fastener that is hard to see or you cannot see at all. 12 point sockets are also great for use in tight spaces as they allow you to connect to a fastener at more angles.

Will an 8 point socket fit a square nut?

8 point, or even special 4 point sockets from Snap On, are great for square headed set screws, drains for small engines, or square headed gearbox plugs. A set of 8 points is not used very often, but real handy when you do need them! Author : Gerald J.

What are 10 point sockets used for?

They are designed for servicing seat tracks ’09 and up Honda Odyssey and Pilot. Both sizes are required for both the driver and passenger side tracks. The sockets have a black finish with 1/4-inch square drive.

What are star sockets used for?

External star sockets are designed for mechanics to replace and remove Torx-type fasteners in motorcycles and other vehicles with ease! Each socket is constructed to withstand the high-force of impact drivers and coated to resist rust. A great set of star sockets to replace Torx fasteners and get you back on the road!

Will a 12 point socket fit an 8 point nut?

Whatever fits and works… Yes they do, but be fore-warned that it’s much easier to strip a 12pt as opposed to a 6pt socket as opposed to a box wrench! Do the math . A regular nut has six sides.

How many points is a socket?

Is this really necessary? Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners.

Is 6 point or 12 point sockets?

The answer depends on your situation. A 6-point end is hexagonal in shape—it has six points, or vertices, evenly spaced at 60 degree increments around a circle. A 12-point end is a double-hexagon (sometimes called “double-hex”)—it has 12 points, or vertices, evenly spaced at 30 degree increments around a circle.

What is a 12 point bolt?

12 Point Bolts. … The 12-point bolt head design means that this screw can be tightened with a 12-point socket wrench which allows higher torques to be applied as compared to a standard internal hex drive socket head cap screw.

Article first time published on

Why are impact sockets black?

Impact sockets are typically black. This is because the surface is carbonized in order for it to harden. Ensuring that the surface is hard allows the sockets to absorb sudden torque changes i.e. “impact” a lot better.

What sockets are the most commonly used?

Hex sockets are the most common type of socket and come in two main types: hex/6 point sockets and bi-hex/12 point sockets.

Can you use standard wrenches on metric bolts?

Yes, you can use some sockets on both metric and SAE sizes. However, you need to be careful, as most times they are not exactly the same, and you can strip a bolt by using an SAE socket on a metric bolt and vice versa.

Can a 12 point socket be used on hex head bolt?

Both 6-point and 12-point sockets can be fitted on hex nuts, the primary differences being convenience and torque. The more points a socket has, the more points of contact available. Compared with the 6-point socket, a 12-point socket has twice as many points, so it can more easily slide onto a hex nut.

What socket has a universal joint?

Universal Joints, or Universal Joint Sockets, are used with a ratchet or other socket driver to drive sockets at an angle. This is often very useful in applications with confined or awkward spaces.

What is the most common ratchet size?

Common ratchet sizes include 1/4-in. drive, 3/8-in. drive, 1/2-in. drive and 3/4-in.

Is there a socket for square bolts?

Sockets & Drivers for Square head Bolts Try using a socket that fits the number of corners on your square head bolts. These Square Socket or 4-point sockets fit many of the common head sizes we sell. Sockets for square head bolts and Square Nuts. Bolts and screws are classified by their shank or shaft size.

What are inverted Torx used for?

CategoryInverted Torx ScrewsThread typeMetric/Imperial/According to Request

Is Torx better than Philips?

Category \ Head:PhillipsTorxmax torquelowerhighercenteringexcellentgoodoverload behaviorcam-outbit/screw failergonomicsaverageexcellent

Why are Torx screws better?

By design, Torx head screws resist cam-out better than Phillips head or slot head screws. … The Torx design allows for a higher torque to be exerted than a similarly sized conventional hex socket head without damaging the head and/or the tool.

Are impact sockets different than regular sockets?

The wall of an impact socket is around 50% thicker than that of a regular hand tool socket, making it suitable for use with pneumatic impact tools, whereas regular sockets should only be used on hand tools.

Is Tekton a good tool brand?

Both Tekton and Gearwrench are great brands in terms of quality and serviceability. This brand manufactures wrenches, ratchets, and sockets. All these tools are meant to make your work easier and accurate. Both brands are reliable, but there has to be a better one.

Are Hex sockets better?

6 Point Hex Sockets Better quality hex sockets have internal walls that are slightly curved. This helps apply the torque from the socket to the flats of the fastener instead of the corners, which reduces the chance of rounding the head of the fastener.

Where are 12pt bolts used?

A lot of times, the 12-point bolts are used for a little higher clamp load. Typically, a 12-point bolt would be seen in the oil and gas industry because of the recessing head of the bolt. This will not be seen when they’re clamping together the end bolts. 12-point bolts are also prevalent in engine applications.

What is a Grade 9 bolt?

Grade 9 structural bolts, also known as grade 9 hex cap screws, are one the strongest structural bolts that can be used today. While the typical grade 8 bolt has a tensile strength of 150,000 PSI, a grade 9 bolt has a tensile strength of 180,000PSI.

What are bolt grades?

The grade of a bolt determines the maximum amount of stress (tensile strength) that the bolt can handle. … The SAE marking system uses raised dashes on the bolt head to indicate strength. Metric Bolt Grades—Metric grades are set according to rules set by the ISO (International Standards Organization).

Why are impact sockets so expensive?

Now, why does the price range of the impact sockets vary so much? Good question. It all depends on how many sockets you’re buying in your set, and whether or not they are deep sockets or shallow sockets. Deep sockets require more material, so they are more expensive.

Can I use regular sockets with an impact driver?

Chrome-plated sockets should never be used with an impact driver. Regular chrome-plated sockets can crack or shatter and send pieces flying. Use only impact-rated sockets for impact guns, and impact-rated sockets or nut drivers for smaller cordless impact drivers.

Are heavier impact sockets better?

The heavier the socket is the more force it takes to overcome the sockets inertia, therefore the less force is applied to nut/bolt to undo it, but on the other hand rigidity of the socket comes into play with that the more rigid the socket the more force is applied to the nut/bolt and is also more reliable.

What size socket set is best?

• ½-inch drive size sockets are for high-torque applications like automotive wheel replacement and when you are using a breaker bar. …
• ⅜-inch drive size sockets are the most common and most available. …
• ¼-inch drive size sockets are ideal when you are in tight spaces or when you are working with recessed nuts.

What are the 5 different types of socket?

• #1) Ratcheting. Ratching is the most common type of socket wrench. …
• #2) Flex Head. There are flex-head socket wrenches that have a swiveling head. …
• #3) T-Handle. One of the most basic types of socket wrenches is the T-handle. …
• #4) Nut Driver. Another type of socket wrench is nut driver. …
• #5) Gearless.