A spline socket is designed to tighten and un-tighten spline fasteners but is also ideal for use on 4-point, 6-point (hex) and 12-point (bi-hex) fasteners, making them a useful socket to use across multiple shaped fasteners.

What is a spline socket used for?

A spline socket is designed to tighten and un-tighten spline fasteners but is also ideal for use on 4-point, 6-point (hex) and 12-point (bi-hex) fasteners, making them a useful socket to use across multiple shaped fasteners.

Is spline or 12 point better?

Spline sockets on spline fasteners help deliver twice the torque of 12 pt. wrenches on double hex fasteners, helping tighten high strength bolts to high torque loads. Spline helps reduce foreign object debris (FOD) by forcing a precise fit between thefastening tool and the fastener.

Are spline sockets universal?

The spline sockets are great for a multitude of different types of hex, square and star shaped fasteners. The sockets only go up to 12 mm but you wouldnt be able to loosen fasteners any bigger than this size anyways given the small foot print of the remarkably small ratchet.

What is spline wrench?

Spline fasteners help tighten high tensile strength spline fasteners which are used in high torque load applications. … The applied loads are moved away from the fastener corners which allow the spline wrench to turn fasteners that are already worn or rounded.

What is a spline screw?

A ball screw spline is a combination of two components — a ball screw and a rotary ball spline. By combining a driving element (the ball screw) and a guiding element (the rotary ball spline), a ball screw spline can provide both linear and rotary motion, as well as spiral motion, in a highly rigid, compact design.

What are spline bits?

Spline bits are designed for use with a rotary hammer drill with a spline drive. The spline bit is placed into the end of the drill and is held in place with a retaining pin that engages just below the spline section of the shank.

Will a 12 point socket work on a Torx bolt?

A 10 mm 12 point socket will not slip over the star and a 12 point 11 mm socket spins and will not grab. The special star bolt needs a star socket. Another way to explain it is that the head of the bolt is shaped like a 12 pointed TORX wrench.

How many splines does a Torx bit have?

Splines (12 splines I think). Tri-square (six sharpish triangular points). External Torx (six fairly rounded points).

What is a spline in math?

In mathematics, a spline is a special function defined piecewise by polynomials. In interpolating problems, spline interpolation is often preferred to polynomial interpolation because it yields similar results, even when using low degree polynomials, while avoiding Runge’s phenomenon for higher degrees.

Article first time published on

What is spline lug nuts?

Spline lug nuts are designed to fit in small diameter recesses found on aftermarket wheels. These lug nuts are characterized by their smooth exterior finish and internal splines on the top of the lug that’s requires a spline drive adapter for installation and removal.

Are 6 point or 12 point sockets better?

Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners. Here’s why: (1) Six-point sockets have thicker walls, so they’re less likely to flew.

What is the difference between SDS Max and Spline?

Spline bits have become much less common than SDS Plus or SDS Max. They are very similar in capacity and variety to the range available to SDS Max bits. The major difference is that chipping bits and drilling bits that are used for spline drive drills have different shanks as one is smooth and the other has splines.

What does SDS stand for rotary hammer?

SDS stands for Slotted Drive Shaft or Slotted Drive System. SDS bits are inserted into the chuck to make a rotary hammer or a hammer drill.

Can I use a SDS drill bit in normal drill?

You should not use SDS drill bits in a standard drill. The chuck on a standard rotary or hammer drill is not designed for SDS drill bits. Standard bits can come loose, damage the drill and affect the quality of your work.

What are Torx screws?

A Torx screw is a type of screw characterized by a six-lobed, star-patterned screw drive. … Torx is available as an internal and external drive although it is most commonly used as a socket within the head (internal). Torx screws were invented in 1967, by Camcar Textron, as an improvement on contemporary drive types.

Is a triple square bit the same as a Torx?

Torx comes in the start-like shape, while the Triple Square has three squares at all 90-degree angles. … At the same time, Torx only uses for vehicles. They are not the same; read the below content and found their differences.

Why are Torx screws better?

First, by design, Torx are less likely to strip out when compared to a hex because of the way the load is distributed and applied between the tool and the hardware. Second, due to the this improved load handling, the height of the screw head can be reduced.

What are 12 point sockets for?

The additional points make these sockets easier to connect with the heads of fasteners. This is ideal if you are trying to work on a fastener that is hard to see or you cannot see at all. 12 point sockets are also great for use in tight spaces as they allow you to connect to a fastener at more angles.

Can I use a 12 point socket on a 6 point nut?

The more points a socket has, the more points of contact available. Compared with the 6-point socket, a 12-point socket has twice as many points, so it can more easily slide onto a hex nut. In other words, you would need to rotate only up to 30 degrees to fit a 12-point socket onto a hex nut.

What is a 12 point bolt?

12 Point Bolts. … The 12-point bolt head design means that this screw can be tightened with a 12-point socket wrench which allows higher torques to be applied as compared to a standard internal hex drive socket head cap screw.

What is the most common socket drive size?

⅜-inch drive size sockets are the most common and most available.

Are impact sockets different than regular sockets?

The wall of an impact socket is around 50% thicker than that of a regular hand tool socket, making it suitable for use with pneumatic impact tools, whereas regular sockets should only be used on hand tools.

What are splines in machine design?

Splines are ridges or teeth on a drive shaft that mesh with grooves in a mating piece and transfer torque to it, maintaining the angular correspondence between them. For instance, a gear mounted on a shaft might use a male spline on the shaft that matches the female spline on the gear.

Does BMW use metric or standard?

1/4″, 3/8″, 1/2″ metric torque wrenches – Make sure it has a metric scale, BMW service documentation is always metric.

Are spline lug nuts safe?

This is not even slightly true. The spline drive key is never a unique pattern, and are easily available from any auto parts store. Relying on spline drive lugs for theft protection is no protection at all.

What is the difference between spline and hex lug nuts?

splines are usually narrower, and will fit more aftermarket wheels where there might not be enough width in the hole to fit a big socket over the hex lug. also, since you mentioned black lugs.