Expanded metal lath is formed from sheet steel that has been slit and expanded to form hundreds of “keys” per square yard. It is proven over time to possess exceptional strength and flexibility, making it the preferred metal base requested by contractors and design professionals.

What is metal lath used for?

Metal lath is used as a platform to embed and attach the stucco cementitious membrane to the structural members of the building. Without the lath there would be little or no way to apply stucco to open frame or sheathed construction.

How thick is expanded metal lath?

Thickness: Standard diamond metal lath: 1/8″. Depth of dimples and grooves: 1/4″. Overall depth of the lath: 5/16″ (7.9 mm).

What is a metal lath in construction?

Metal lath, a mesh formed by expanding a perforated metal sheet, is made in a variety of forms (diamond-mesh, flat-ribbed, and wire lath). The sheets of metal are slit and drawn out to form numerous openings, creating an irregular surface for the keying of the plaster.

How do you attach metal lath?

For the metal lath, attach 2.5 lb. expanded, galvanized, metal lath to each stud 6” on center-vertically, penetrating the studs at least one inch. Be sure to attach the lath horizontally. The surface should feel rough as you rub your hand upward.

When was metal lath first used?

While the first metal laths were patented in 1797, modern metal lath dates to the late 19th century. [1] Its creation arose from the need to fireproof buildings by eliminating wood components, in this case it was replacing wood lath with metal.

How do you install metal lath on concrete?

Hold the lath against the wall with the diamonds created from expanding the mesh pointed upward. Secure it in place using 7/8-inch concrete nails with a washer over the nail shaft to hold down the mesh strands. Drive the nails through the mesh into the concrete wall using a hammer.

How many square feet does a bundle of wire lath cover?

Typical Sizes It Comes In: High rib lath comes in sheets that measure about 27″ by 8′ and are sheets as opposed to rolls. You will get approximately 16 square feet of coverage per sheet after overlapping the edges.

What gauge is metal lath?

2.5 Gauge Galvanized Metal Lath, Lath Both self furring & flat lath in stock and ready to ship immediately.

What is Self furring metal lath?

Self-Furring Dimpled Diamond Mesh Lath is used over solid surfaces like concrete, cement board, column fireproofing, masonry and replastering over old surfaces. The self-furring dimples hold the metal lath 1/4″ away from the surface to be plastered.

Article first time published on

How do you fix expanded metal lath?

Expanded Metal Lath can be fixed to a solid background using a suitable fixing with an integral spacer/washer and large diameter headed screw/nail that will keep the sheets firmly in place.

Is metal lath directional?

Metal lath should be hung horizontally. Joints between panels should be staggered in a standard brick-laying pattern.

Does metal lath need to overlap?

ASTM C 1063 requires that expanded metal lath be lapped a minimum of 1/2 inch along the long dimension of the sheet and a minimum of 1 inch along the end of the sheet. This specification does not limit the laps to any maximum size, however.

How is metal lath made?

Expanded metal lath is made by slitting and pulling apart a thin sheet of metal, which produces diamond-shape holes through which the plaster can form keys. Ribbed lath is made from slit and expanded metal with V-shaped ribs which give it more stiffness, and is designed to span larger distance between framing supports.

How do you cut metal lath and plaster?

Cut the Plaster Walls A diamond blade can also cut through metal lath, which was sometimes added over wood lath at corners and archways. Cutting with a grinder whips up tons of dust. You can also use an oscillating tool equipped with a diamond or carbide- grit blade, which will cut slower but with less mess.

Can you use chicken wire in concrete?

Chicken wire or wire mesh can be safely used as a reinforcement in concrete when the concrete is not used in structural or high-weight areas. The wire mesh or chicken wire can add stretching strength that concrete does not have, giving the concrete rigidity when facing specific pressures.

What is rib lath?

Ribbed Lath is a versatile metal lath stiffened by the longitudinal ribs. It has V ribs and greater tensile strength offering excellent plaster base and reinforcement for all types of walls, ceilings and fireproofing of steel beam, and columns. … It is commonly used for plaster machine application.

Is metal lath galvanized?

All ClarkDietrich Expanded Metal Lath is fabricated from prime galvanized steel, G60 zinc coating by the hot dipped method, conforming to Specification ASTM A653/A653M.

When was expanded metal lath invented?

The process for creating expanded metal was first developed and patented in the 1880’s in Hartlepool, UK.

What is redwood lath used for?

Redwood lath is great for fencing, trellises, and custom latticing. Natural redwood weathers beautifully and naturally when used in outdoor projects. Redwood lath is great for fencing, trellises, and custom latticing. Natural redwood weathers beautifully and naturally when used in outdoor projects.

What is another word for lath?

In this page you can discover 17 synonyms, antonyms, idiomatic expressions, and related words for lath, like: slat, strip, batten, mesh, groundwork, planking, joist, dowel, purlin, steel-plate and treenail.

How much does metal lath cost?

On average, metal lath costs between $1.03 and $1.27 per sq. ft. to install.

What is diamond mesh?

Diamond mesh is a kind of mesh with diamond mesh opening. According to production processes, diamond mesh can be divided into: woven diamond mesh (that is chain link fence) and expanded diamond mesh. … Chain Link Fence is made of high quality galvanized wire, PVC wire or stainless steel wire.

What is self furred?

Said of metal lath or welded wire fabric having some means of spacing it from a wall; when plaster, stucco, or concrete is applied to the fabric, the space makes it possible to key, 8 the applied material to the metal lath or welded wire fabric.

What is Diamond lath?

DIAMOND MESH LATH is manufactured by slitting and stretching galvanized steel to form small opening to allow the keying of plaster so it will bond to the lath. Each sheet has square ends and smooth parallel edges for fast, easy handling and installation. Diamond Mesh Lath can be bent easily to create curved surfaces.

How many pieces are in a bundle of metal lath?

Nominal sheet size 27” x 96” Packaging: 10 pcs. (20 square yards) per bundle – 50 bundles (1000 square yards) per pallet.

Can I put stucco on cement board?

Apply stucco to cement boards with the help of a fiberglass mesh for adherence. … One finish you can use on cement boards is stucco. Extensive preparation is necessary, but once completed, you’ll have a beautiful surface, suitable for further finishing by painting or left as-is for a raw plaster look.

When did they stop using plaster and lath?

The lath and plaster model was popular in the United States and Canada through the 1950s; however, this was replaced with drywall and plasterboard by the 1950s. This modern material worked better with wiring practices, as electricity became standard in most homes and offices.

What is C1063 ASTM?

ASTM C1063 – 21 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster.

What is lath in stucco?

Lath is simply the first step in the stucco process. It consists of water resistant paper, (sometimes eps foam) wire and other metal components that make up the essential “framework” for the cement to be adhered to. It attaches to the substrate and is the structure for the following coats.

When cutting expanded metal What do you use?

Cutting expanded metal is simple using a hand held torch; simply turn the dial on the front of your system to the Expanded Metal mode, place your torch on the metal to be cut and pull the trigger. Mechanized cutting is just as easy, although you want to be sure to turn off your torch height control first.