The optical jack is designed to output sound when the video you’re watching contains digital audio (PCM or Dolby Digital® technology). This feature is available on certain digital broadcasts and streaming video, and isn’t supported on standard cable or analog stations.

Is optical cable better than HDMI?

The major difference is that HDMI cables can pass higher resolution audio which includes formats found on Blu-ray like Dolby TrueHD and DTS HD Master audio. Fiber optic cables won’t be able to transmit these high-res sound formats. HDMI can also pass video signals. … Here, optical cables will be the perfect fit.

How do I connect my optical cable to my TV to receiver?

Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system. Depending on your device, the audio input may be labeled TV INPUT or VIDEO INPUT.

Can I use HDMI and optical audio at the same time?

From box both HDMI and optical can take in same time.

Do I need optical cable with HDMI?

A common question is, do you need to use optical audio with HDMI? If your AV equipment has an HDMI port, then in most cases, it would be best to transfer the audio signals via HDMI. This is because HDMI supports all types of audio signals, and you can send all the video and audio signals via one cable.

Does the optical cable matter?

So if you’re getting a Dolby Digital signal, and it’s not cutting out, your optical cable is fine. If you’re transmitting PCM, the audiophile answer is that different optical cables can cause different amounts of jitter. The reality is, the digital-to-analog converter in your gear has vastly more effect on the sound.

How do I get sound on my TV through HDMI?

Right-click the volume control icon on the bottom taskbar and click on “Playback Devices” to open the pop-up window for sound options. In the “Playback” tab, select “Digital Output Device” or “HDMI” as the default device, click “Set Default” and click “OK” to save the changes.

Is optical better than aux?

In terms of audio quality, aux is more open to line loss and interference. … Higher quality aux cables can also help as they’re better shielded. Optical isn’t foolproof either. Though not prone to interference in the way that aux is, digital can ‘lose’ data, especially over longer cable runs.

What does the optical cable do?

A digital optical cable is used to transfer data, usually audio or video, from one source to another. Digital optical cables are typically more expensive than other types of cables, such as coaxial or composite, but are much more effective at reproducing a signal through the transfer.

How do I connect my optical cable to my Samsung TV?

1. Insert the digital optical audio cable into the DIGITAL AUDIO OUT port of the TV.
2. Insert the other end of the digital optical cable into the DIGITAL AUDIO IN port of your external speaker.
3. Press the Home button on the remote control and select Settings.

Article first time published on

What does optical mean on Samsung TV?

The optical jack is designed to output sound when the video you’re watching contains digital audio (PCM or Dolby Digital® technology). This feature is available on certain digital broadcasts and streaming video, and isn’t supported on standard cable or analog stations.

Can I use HDMI and optical?

Both cables can be had pretty cheap. The biggest difference is that HDMI can pass higher-resolution audio, including the formats found on Blu-ray: Dolby TrueHD and DTS HD Master Audio. These formats can’t get transmitted across optical. … So if you want just a single cable between two devices, HDMI is your pick.

Should I connect both optical and HDMI?

They both transfer the same digital signal and there’s absolutely no difference in quality. All the optical cable would do is to add complexity with an additional cable. Practically if you transfer both audio and video use HDMI, if you transfer only audio use optical (or digital coaxial).

How do I know if my TV has optical audio output?

You can check if your devices support TOSLINK audio cabling by looking on the back of the device for the distinct TOSLINK port. The port is typically labeled “optical audio”, “TOSLINK”, “Digital Audio Out (Optical)” or something similar, but you certainly don’t need a label to identify it.

Do all TV have optical out?

Most TV’s that have either 3.5 mm or wireless capability have HDMI or optical ports. However, older TV’s will only have RCA and coaxial inputs.

Is optical better than Bluetooth?

Bluetooth transmission depends on the bandwidth of the radio transfer technology, hence the need for signal compression. Whereas for optical audio, there is no compression of the signal. Therefore, optical audio quality will be better than Bluetooth audio as compression introduces some losses.

Why does my HDMI have no sound?

Disconnect the HDMI cable from the HDMI input of the TV and connect the source device to a different TV. … If there is still no sound, perform a power reset on the TV . If there is still no sound after power resetting the TV, replace the HDMI cable. Perform a factory reset .

Why does my TV not have sound?

Make sure all A/V cable connections are properly connected to the TV. … Perform a power reset on the TV. NOTE: For Android TV™ or Google TV™, follow these steps to perform a power reset. If using a set-top box, try resetting it.

Why does my HDMI cable not transfer sound?

Make sure the HDMI cable is firmly connected to the source device and the device to which it is being connected. If the device is not firmly connected, you may see a picture but you may not hear audio. … If the HDMI cable you are using is frayed or damaged, try using a different HDMI cable.

Is HDMI an optical cable?

HDMI and Optical cables cables are two popular choices for transmitting audio from a source, such as a TV, or Blu-ray player, to an external A/V system, or speaker setup. HDMI can transmit both audio and video, while optical transmits audio only.

What cable gives best sound quality?

If you’re looking for the best audio quality, HDMI is your choice. While an optical cable can still pass surround sound and super high-quality audio, thanks to the added bandwidth in the latest HDMI versions (2.0) you’ll be able to pass higher resolution and audio.

Which optical cable is best?

• AmazonBasics CL3 rated Optical Cable (For In-wall installation) …
• Monoprice Premium Optical Audio Cable. …
• FIRBELY Digital Optical cable. …
• FosPower Toslink Digital Optical Audio Cable (Best Affordable Optical cable) …
• CableCreation Digital Optical Audio Cable.

Is digital audio the same as optical?

The audio signal stays in a digital format using either of these cables. The differences between the two connections are as follows: A Digital Optical connection uses a fiber optic cable. The digital audio bit stream is transmitted using pulses of light through this optical cable.

How does an optical cable work?

How Do Fiber Optics Work? Light travels down a fiber optic cable by bouncing off the walls of the cable repeatedly. Each light particle (photon) bounces down the pipe with continued internal mirror-like reflection. The light beam travels down the core of the cable.

What does optical mean on soundbar?

The best connection, if it is available both on your TV and soundbar, is a Digital Optical audio connection. This feature uses a beam of light to send a digitally encoded audio signal between your TV and your Sound Bar. By using light, there is no loss or interference to the signal.

Do I need optical cable for soundbar?

If your TV or soundbar doesn’t have an HDMI connector, you need to use an optical cable. This small port gives your TV a new sound experience. … Keep in mind that an optical cable doesn’t support HD audio formats such as Dolby TrueHD and DTS-HD Master Audio.

Which connection is best for soundbar?

HDMI: The Best Way to Connect a Soundbar to a TV The best way to connect your soundbar to your TV is with an HDMI cable. This is because HDMI transfers audio digitally, which means it will be raw and uncompressed. Also, HDMI cables can handle the most high-end soundbars, including ones that support surround sound.

Are optical cables all the same?

All optical cables are the same. Don’t pay a premium for any fancy glass cables. A cheap, but properly made plastic cable has better durability. Optical cables don’t need to be shielded so don’t buy into any claims about shielding.

Why does my Samsung TV not have audio out?

Press “Menu” on the remote, then select the “Support” menu. From there, select the “Self Diagnosis” option and then choose “Sound Test”. The TV will play a melody out of the built-in speakers. If you hear the sound, then the audio problem (whatever it may be) isn’t in the TV’s components.

How do I connect my Samsung TV to my sound system?

1. Prepare an HDMI cable.
2. Connect the cable to the TV’s HDMI IN (ARC).
3. Connect to the HDMI OUT (TV-ARC) port of the soundbar.
4. Turn on the soundbar and set the Source to D.IN.
5. The TV sound will be played through your soundbar.

How do I turn the optical off on my Samsung TV?

Using Samsung TV remote, go to the settings menu of your TV. From settings hover to the sound section. From sound section make sure sound output is set to Audio out/Optical instead of TV speakers.