Reciprocating Saw Blades.Vacuum Pump.Mobile HVAC Software.Refrigerant Scale.Cordless Drill.Screwdrivers.Pipe Wrenches and Pliers.Tin Snips and Shears.

What are the tools used in HVAC?

• Essential HVAC Tools.
• Screwdrivers. Keep a range of screwdrivers, a basic and necessary HVAC tool, in your toolbox to be prepared for any size screw. …
• Pliers. Be ready to handle most sizes of wires, bolts and pipes with a full set of pliers. …
• HVAC Software.
• Hammer. …
• Flashlight/Headlamp. …
• Wrenches. …
• Cutters.

What tools do I need for ductwork?

• Aluminum Handle Snip.
• Aviation Snips.
• Cable Tie Tensioning Tool.
• Duct Knife.
• Duct Slitting Tool.
• Duct Stretcher.
• Folding Tools.
• Hand Crimpers.

What tools do I need for commercial HVAC?

• Screwdrivers. …
• Assorted pliers such as insulated wire stripping, needle nose, open-face, linesman, and channel-lock pliers. …
• Wrenches including pipe, crescent, fixed and adjusted.
• Metal and tubing cutters. …
• Impact and/or driver electric drill (18 volts is best) with spare batteries and various drill bits.

What is the main tool a technician would use to diagnose HVAC problems?

The HVAC thermometer is specialized for HVAC work. Multimeters protect HVAC technicians from electrocution. The multimeter checks for electrical current, so the technician can determine if voltage is present.

Do HVAC Techs buy their own tools?

However, technicians are expected to purchase a set of basic hand tools and a few additional items. That said, you should know that most employers will provide replacements or reimbursements if your tools get broken or damaged on the job.

What is an HVAC service wrench?

The refrigeration service wrench is as much a staple of the HVAC/R industry as a gauge manifold. … It’s really just a square drive ratcheting box wrench, usually with several sizes built-in with 1/4″, 3/16″, 5/16″, and 3/8″ being the most common.

What is the function of duct?

Ducts are conduits or passages used in heating, ventilation, and air conditioning (HVAC) to deliver and remove air. The needed airflows include, for example, supply air, return air, and exhaust air. Ducts commonly also deliver ventilation air as part of the supply air. … A duct system is also called ductwork.

What is a duct knife used for?

Duct Insulation Knives are designed to smoothly cut fiberglass insulation. The sharp blade cleanly slices through the fiberglass and facing without snagging the material.

What does an HVAC Helper do?

HVAC helpers work with HVAC technicians to install, troubleshoot, repair, and maintain residential and commercial HVAC systems and equipment. HVAC helpers are generally trained in all aspects of heating, ventilation, and air conditioning installation.

Article first time published on

What is manifold gauge?

A manifold gauge is a pressure-checking system. … When used as a service tool, a manifold gauge can be used to release moisture and sludge, and remove contaminated refrigerants from the system.

Why is it important to select appropriate tools for a job?

Once again, using the right tech tool is extremely important because no matter how good your organization is, if you are not using the right tool, your work could be greatly hindered. Using the right tool helps you to complete the people-process-product trifecta that will ultimately lend itself to leverage your impact.

What size is a HVAC service wrench?

Wrench size: Size: 1/4 inches and 5/16 inches.

What is a spanner used for?

The spanner is a hand-held tool used to provide grip and tighten or loosen fasteners. It gives a mechanical advantage in applying torque to turn objects. The tool is used in turning rotary fasteners like nuts and bolts.

What is a refrigeration wrench?

Wrench is designed for refrigeration packing gland nuts and valve stem sockets, and beam-clamp installation. Wrenches are compact in size, with clearly marked sockets for four nut sizes.

What is HVAC piping?

HVAC piping delivers hot water, cooled water, refrigerant, condensate, steam, and gas to and from your HVAC components. Its effectiveness is largely influenced by the materials used to make it.

What is ahu in HVAC?

An Air Handling Unit (AHU) is used to re-condition and circulate air as part of a heating, ventilating and air-conditioning system. … AHUs connect to ductwork that distributes the conditioned air through the building and returns it to the AHU.

What is MEP HVAC?

HVAC is a critical element of residential, commercial and mixed-use buildings. … MEP in the construction and HVAC industry refers to the mechanical, electrical and plumbing (MEP) aspects of building construction and design. MEP is widely used in commercial buildings.

How much does HVAC tools cost?

The cost of basic hvac tools is between $200 and $300 for an entry level service technician. A new service technician will spend about $500 for both sets to do some of the jobs.

Can my employer make me buy my own tools?

In California, an employer must generally provide and maintain any necessary “tools and equipment.” 1 The law makes two narrow exceptions under which an employer can require an employee to buy his own tools and equipment: (1) the “hand tool” exception; and (2) the “beauty salon” exception.

Why is refrigerant recovery necessary?

Refrigerants are recovered to prevent them from leaking or being dispersed into the atmosphere. … The Chlorine contained in CFC/HCFC refrigerants will work it’s way up into the atmosphere and will end up causing damage to the O-Zone layer.

What is duct board?

Duct board is a semi-rigid fiberglass insulation material often used for residential or light commercial heating and cooling applications in lieu of metal duct.

What are the 4 types of duct systems?

• Fiberglass Lined Air Ducts. Whether on the interior or exterior of the system, a fiberglass lining insulates the ducts to prevent heat loss or condensation. …
• Fiberboard Air Ducts. …
• Sheet Metal Air Ducts. …
• Flexible Air Ducts.

What type of metal is used for ductwork?

Made of galvanized steel or aluminum, rigid sheet metal is the most common type of ductwork. The thick, solid wall makes the duct very durable. The interior is known to trap dust and other particles, but the smooth surface is generally easy to clean.

What is bottom of duct?

Bottom of Duct: The elevations refer to the bottom of the duct. The duct will extend above these elevations. If the duct has hangers, they will extend below this elevation. Bottom of Hanger: The elevations refer to the bottom of the hanger for the duct.

What is HVAC engineer?

HVAC Engineers are experts in the design of systems that control temperature and airflow throughout commercial buildings and residences. … He can be in charge of designing these systems for a new building or for retrofitting existing buildings. The meaning of HVAC is heating, ventilation and air conditioning systems.

What skills are needed for HVAC?

• Problem-Solving Abilities. An HVAC technician must be able to identify a problem and fix it. …
• Communication Skills. …
• Time Management Skills. …
• Comfort Working With Heavy Objects and Machinery. …
• Familiarity With Computers.

What is HVAC maintenance?

HVAC maintenance is the process of maintaining the heater or air conditioner by inspecting, cleaning, testing, or even repairing and replacing components in the system. By investing in maintenance for your HVAC system, you can fix issues before they become bigger problems.

Which is better 3 or 4 port manifold?

For basic tasks, a three-port manifold will generally suffice. Four ports may be necessary for vacuum-pulling applications and for larger HVAC systems.

What type of valve is used in heat pump?

The expansion valve most commonly used in the heat pumps is copper capillary tube. The refrigerant leaves the expansion valve at extremely low pressure and low temperature in partially liquid state and partially gaseous state.

What is manifold valve?

Manifold valve function A manifold is a device that connects one or more block/isolate valves of a hydraulic system. Valves of a hydraulic system can include a ball, needle, bleed and vent valves.